Wiring Appendix IX Extra bits required for 2B Wiring

This list is my personal list, you may wish to add or delete as required

Large insulated "P" clips - Loom to Firewall - 6

Illuminated switch for Rear Fog Light - 1

Heater Blower Switch - 1

Mini Wiper plug & connectors - 1

6mm thin wall plastic tube - 2 metres

Heat shrink sleeve -1 metre

Insulated crimps for wire to wire connections, Red - 50, Blue - 10

6mm Plastic "P" clips for clipping wire loom in boot area - 6

Red Convoluted Hose (bends very well, limited stocks at 0161 432 8435)

Used on the Number Plate & Rear Lights etc. - 3 metres

Battery Covers (2) Check type.

Grommets. Passing wires thro' panels etc. - 6

Earth Strap -1

Heavy duty cable, Battery to earth. (Black) Battery to Starter.(Red) Battery to Alternator.(Red)

Heavy duty Terminals for above cables. - 6

Panel mounted Battery Master Switch. This is required by the SVA

Most of these items are from Premier Wiring Systems

Side Light Adaptors Robin Hood Sports Cars 2 off

Tywraps. - 24

Self Adhesive Tywrap pads. - 6

Bullet Connectors and Ends. - 20

Back to Wiring Section

 

Return to the Robin Hood Front Page

Copyright Text © Colin Usher 2009 Illustrations © Colin Usher 2009

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical or photocopying, recording or otherwise without the prior permission of the copyright holder. Except for private & non-profit use.